Nothing to add or mix, this clear gloss, moisture cure urethane replaces varnish, is quick drying, non-yellowing and maintains superior adhesion, scratch resistance and UV resistance.

Can FAMOWOOD Glaze Coat be used outdoors?

FAMOWOOD GLAZE COAT HIGH BUILD EPOXY COATING is an ultra-clear, high gloss finish epoxy versatile enough to be used on just about any surface, either smooth or rough, stained or painted.

Is FAMOWOOD Glaze Coat the same as epoxy resin?

What is FAMOWOOD GLAZE COAT High Build Epoxy Coating? FAMOWOOD Glaze Coat is an ultra-clear epoxy CRAFT resin that dries to a high gloss finish. It is versatile enough for creating unique jewelry pieces or a coating for use on almost any surface.

Does FAMOWOOD Glaze Coat yellow?

It completely ruined my project it also wasn’t very cheap. Not only did it turn my project yellow but also even with the heat gun there were bubbles throughout the WHOLE THING. Not only did it turn my project yellow but also even with the heat gun there were bubbles throughout the WHOLE THING.

What is FAMOWOOD Glaze Coat used for?

FAMOWOOD Glaze Coat is a pour-on epoxy coating that can be used on most surfaces – rough or smooth, stained or painted. It’s great for coating tables or bar tops, preserving photographs or imbedding decorative items.

How long does it take Famowood Glaze Coat to cure?

Allow fresh pours to cure in a warm room (at least 70 °F). Glaze Coat will fully cure in 72 hours. An additional 1 – 2 coats may be applied after 4 – 5 hours. A third coat can be poured after 24 hours but no longer than 48 hours.

Does Glaze Coat self level?

Glaze Coat CRAFT is self-leveling. However, if necessary, spread the mixture over the area with a toothpick or small tool. Do not persist in re-spreading the mixture as it sets up, otherwise it will not self-level during the curing action.

Is glaze coat the same as epoxy?

Famowood Glaze Coat is a pour-on epoxy coating. This ultra-clear, high-gloss finishing epoxy is ideal for home improvement and craft projects. Just one coat equals 60 coats of varnish. Glaze Coat is great for coating tables, bar tops, preserving pictures and photographs or imbedding items such as coins or rocks.

Can you put polyurethane over Famowood glaze coat?

To coat over polyurethane or acrylic finishes, lightly sand the surface and wipe with acetone or alcohol before using Glaze Coat. To catch drips, cover surrounding area with waxed paper or drop cloth. Allow drips to flow freely off the sides by elevating area to be coated.

Is one coat of epoxy enough?

Manufacturers may suggest two coats of epoxy paint and topcoat, but most standard kits only supply enough for one coat. If you choose to add color flakes, which will help hide concrete’s inherent imperfections, determine how heavily you’ll broadcast them across the floor so you don’t come up short.

Can I add color to FamoWood glaze coat?

The FamoWood epoxy can withstand temperatures up to 120°F. Anything over this, and you will harm your epoxy product, so be careful! You can use paints and pigments to color this product, however it is recommended to test this in a small amount before adding it to your entire mix.

How do you keep UV resin from yellowing?

Many epoxy resins on the market include a UV stabilizer (aka UV inhibitor) to help protect against yellowing, as well as other problems that epoxies are prone to (such as de-lamination, chalking, cracking and gloss loss). In truth, a UV stabilizer is necessary and effective, except when it comes to the yellowing issue.

Will clear epoxy yellow?

Epoxy resin turns a yellow hue due to exposure to a myriad of elements. High temperatures, excessive amounts of water, and UV light can all cause the epoxy to change from clear to yellow in tint.

How deep can you pour glaze coat?

Pour mixture on surface and spread evenly using a combing action in one direction over entire surface. Do not persist in re- spreading the mixture as it sets up, otherwise it will not self-level during the curing action. Do not pour more than 1/8” thick in an application.

What is coat of glaze?

A glaze in cooking is a coating of a glossy, often sweet, sometimes savoury, substance applied to food typically by dipping, dripping, or with a brush. Egg whites and basic icings are both used as glazes. They often incorporate butter, sugar, milk, and certain oils.

Is glaze coat oil based?

Famowood® Glaze Coat® Interior Oil-Base High-Gloss Clear Epoxy Kit – 1 qt. Famowood® Glaze Coat® is a pour-on epoxy coating. This ultra-clear, high gloss finishing epoxy is ideal for home improvement and craft projects.

Should you sand between coats of epoxy?

Sanding will not only get out the imperfection but will also serve to provide some tooth between the first and second layers. It will look very scuffed in the short term but do not worry, once you pour the second coat over top, all of those sanding marks will disappear.

Can you recoat glaze coat?

Yes, you can apply a second coat of resin if you need to fix a mistake or a surface imperfection. You can also pour multiple layers if you need to cover areas of high relief, if you’re pouring into a mold or if you simply like the look of a thicker coat.

How long should you wait between resin layers?

Allow your resin to set up 3-6 hours between layers, depending on the weight of what you’re adding to the next layer. Example: if adding heavy metal charms to the layer, let previous layer set up for about 6 hours so the charm doesn’t push down into the layer below.

Does tacky epoxy ever cure?

You cannot leave the sticky resin, as it will not harden after time, it will remain sticky. You will have to either throw your item away or fix the problem. In order to avoid the problem all together make sure to do the following: You must measure out your resin and hardener precisely.

Can you put polyurethane over glaze coat?

5. Apply at least two coats of water-based poly in order to protect your surface. Make sure that you use water-based polyurethane over water-based glazes and oil-based over oil glazes for consistency.