Oil-based polyurethane is very tough and dense. This affects how many coats of polyurethane are required for hardwood floors. If your floor isn’t too old or damaged, applying just two coats might be enough. Also, it is easier to apply and less temperamental when you work with different types of wood.

Is 2 coats of polyurethane enough?

For ideal results, you should use about three or four coats. You will also have to wait quite some time between coats, as this polyurethane takes longer to dry. No matter how many coats of polyurethane you apply, it will always be quite a time-consuming process when using an oil-based finish.

Do you really need 3 coats of polyurethane?

One coat generally won’t be thick enough to provide lasting protection, nor smooth enough. Many thinner coats result in a better finish that will generally dry better than fewer thicker coats. You can go more than three coats but the results may worsen if you go too many as it’ll have that real plastic-y feel to it.

Is two coats of oil based polyurethane enough on hardwood floors?

OIL BASED POLYURETHANE: We recommend at least 2 coats of oil based polyurethane + a lacquer sealer coat as a minimum for hardwood flooring. Extra coats = extra protection, but only one coat of oil based polyurethane may be applied per day, as it needs 24 hours to dry before applying another coat.

How many coats of polyurethane should you put on hardwood floors?

The number of coats you apply depends on the type of product you’re using. For oil-based products, it’s usually enough to have two coats or a maximum of three. For water-based polyurethane-finished wood floors, plan to apply up to four layers. It’s best to apply more coats than settle for less.

What happens if you dont sand between coats of polyurethane?

“MYTH #7 — Scuff sand between coats to get a good bond. The purpose of this instruction is to create scratches in the surface so the next coat of finish can establish a “mechanical” bond. Polyurethane dries slowly, so there are always dust nibs that should be sanded out before the next coat is applied.”.

How long should you wait between coats of polyurethane?

Allow product to dry a minimum of 1-2 hours between coats. Sanding between coats is not required for adhesion as long as the time between coats is less than 6 hours. However, screening or sanding between coats usually produces a smoother better looking finish. A minimum of 3 coats of finish are recommended.

How many coats of polyurethane are waterproof?

Polyurethane does not make hardwood waterproof, but it does provide a strong protection layer to make wood water resilient and protect your floors from scratches. To give your floors the best protection, be sure to use 3 coats of a high grade polyurethane.

Should I sand between coats of polyurethane?

The main reason to sand polyurethane between coats is to level dust nibs and other flaws, not to create a better bond. This is demonstrated here by the gloss remaining in the pores after sanding the surface. The next coat of finish still bonds in the pores even though the finish there is rarely scuffed.

How many coats of polyurethane should I use?

For protection, two coats are the minimum, but floors and anything else that will see hard wear or occasional moisture should get at least three coats. Each coat also makes the finish a bit smoother.

Can you put too many coats of polyurethane?

Generally, more than 3 coats of poly doesn’t do much good. It’s really not needed nor recommended. Each additional coat needs to be buffed so you are kind of buffing off half of the previous layer. Each additional coat takes longer to try due to the added layers.

How much does it cost to refinish $1000 square feet of hardwood floors?

Cost per square foot to refinish hardwood floors: Flooring square footage Average cost 751 – 1000 sq. ft. $2,100 1001 – 1500 sq. ft. $2,350 1501 – 2000 sq. ft. $3,500 2001 – 3000 sq. ft. $5,000.

When can you walk on hardwood floors after polyurethane?

Fresh polyurethane can be walked on as soon as all signs of wet finish disappear. You may be able to walk on the floor as soon as two hours after applying WBP and eight hours after applying WBP. You should wait two days before moving furniture onto a floor finished with WBP — four days for OBP.

Do you buff hardwood floors after polyurethane?

Your polyurethane wood floor finish is not going to look perfect on the first coat. Simply give your polyurethane finish a good buffing with a new 180 or 220 grit screen. This will remove flaws such as brush marks, lap marks, bubbles, raised grain and any particles left on the polyurethane finish.

How bad is breathing in polyurethane?

When left uncured, polyurethane can cause asthma and other breathing problems. Those who spend time in rooms that have uncured polyurethane floor treatments may also experience health issues like throat and eye irritation, nausea, vomiting, headaches, coughing, and shortness of breath.

Do you have to seal hardwood floors before polyurethane?

Most unfinished hardwood floors require one coat of sealer and at least two coats of protectant finishing. Sealing is very important, especially under polyurethane finishes, because it seals the wood and helps to prevent panelization; the separation of groups of boards from others or from the rest of the floor.

How do you smooth the final coat of polyurethane?

Wet Sanding The Final Coat of Polyurethane Finish Pour mineral spirits over the poly finish. Use a minimum 400 grit sandpaper wrapped around a sanding sponge. Lightly begin wet sanding in the direction of the grain. Let the mineral spirits evaporate.

How long should I wait to apply a second coat of polyurethane?

Apply thin coats to avoid runs and sags. Recoat within 2 hours. If unable to do so, wait a minimum of 72 hours, then lightly sand and recoat. Apply at least three coats on unfinished wood and two coats on surfaces already finished.

How do you fix bad polyurethane?

The problem is easily fixed. Sand the uneven finish using fine-grit sandpaper. Try not to sand too hard or you may go through into the stain, requiring that you re-stain the area. Wipe away dust and debris with a clean cloth. Apply a very light coat of polyurethane to the sanded area with a brush.

Why do you have to wait 72 hours between coats of polyurethane?

The reason for this is, the solvents in the second coat must be able to disrupt the final cure (of the first coat) enough to penetrate a soft film, and still provide enough “open” time to allow for the dry-through solvents to evaporate (the low-flash solvents are gonna evaporate very quickly).

How long should polyurethane dry before waxing?

Let the wax dry. If you’re using Minwax or a similar product, the recommended drying time is 10 to 15 minutes.