An overlock is a kind of stitch that sews over the edge of one or two pieces of cloth for edging, hemming, or seaming. Loopers serve to create thread loops that pass from the needle thread to the edges of the fabric so that the edges of the fabric are contained within the seam.

What is an overlock stitch on regular sewing machine?

What is the Overlock Stitch? The overlock stitch is a combination of a straight stitch and a zigzag. It sews backwards and forwards in a straight line, but between every set of straight stitches, it sews a zigzag. If done correctly, this resembles serging, which is how most store-bought clothes are sewn.

Is an overlock stitch the same as a serger?

A serger and an overlocker are different names for the same machine. Americans generally refer to these as sergers, and nearly everyone else refers to them as overlockers. A serger performs an overlocking stitch, which is really more like knitting than sewing.

Can you do normal sewing on an overlocker?

Although you can create knit garments on a sewing machine, you can also make them using an overlocker. However, I’ve often heard people say they only use their overlocker for finishing seams. You will normally need to adjust the differential feed up a notch or two to work with knit fabrics.

Should you Overlock before or after sewing?

You can use the overlocker to finish the seams together after constructing your garment but before doing any topstitching. You’ll want to try on the garment and make sure the fit is spot on before finishing the seams in this way.

Can you cover stitch with a serger?

You don’t have to take the time to re-thread and set up a standard serger for a cover stitch, you simply switch to the cover hem machine to create the hem, then go back to your regular machine for basting or buttonholes, then back to your standard serger for clean seams.

Can a serger sew a straight stitch?

These are two thread serged pintucks, which are commonly made on a sewing machine with straight stitching. These pintucks were made using two threads on a folded edge without the knife to cut the fabric. The serger stitching creates a more decorative pintuck than straight sewing machine stitching.

Can you use a serger for regular sewing?

Although some projects can be done 100 percent on a serger, a serger cannot replace a regular sewing machine. You will still need a regular machine for facings, zippers, topstitching, buttonholes, etc. A serger cannot do this job.

Do I really need an overlocker?

Long answer: No, you don’t need an overlocker, but it gives a more professional finish to many clothes. An overlocker creates a stitch that trims and wraps the raw edges of your project and can sew a seam at the seam time.

What stitches can an overlocker do?

In a nutshell, an overlocker is a sewing machine that stitches with either 3, 4 or 5 threads at the same time. They are mainly used to join seams, trim off the excess fabric and stop the cut edges from fraying all in one simple operation. Take a quick look around you, at the things in your home.

What is the difference between a cover stitch machine and an overlocker?

Well, the short answer is they are really two different machines and do two different things altogether. With overlockers, it’s main purpose is to tidy up seams and prevent fraying. A coverstitch machine on the other hand, has a looper like an overlocker but doesn’t have a blade.

Should I Serge before or after sewing?

Sew first, then serge: I think this would be a good place to start if you’re a serger noob. A serger does take some adjustment when sewing. Because the machine cuts the seam allowance off as you sew, you’ve got a lot less room for error.

What is the most common way to put together your fabric pieces when sewing seams?

The answer is: Right sides together.

What kind of stitches can a serger do?

All sergers can do 3 or 4 thread overlock stitches. Only mid-range and high-end sergers can do a 2 thread overlock.

Is a Coverstitch machine worth it?

A coverstitch machine is primarily used for hemming and topstitching knits. Especially when hemming stretchy Lycra knits, a coverstitch is usually vastly better than a regular sewing machine.

Is it worth buying a serger?

When you are sewing with woven (non-stretchy fabrics like in the photo above) a serger is helpful because it will finish the raw edges and prevent fraying. But it is not necessarily the most durable way to sew the seam, so the proper method is to sew the seams with a sewing machine first.

Do you need a serger to sew clothes?

You don’t need a serger in order to sew beautiful things. Finishing seams without a serger can make any garment or home decor project have a finished look and last a lifetime.

How much does a serger cost?

More advanced sergers may use five or up to eight threads. Depending on your needs and projects — from clothes for yourself and family to home decor and garments for sale — you can choose from models ranging in price from $200 for personal use to $500 or more for commercial use.

What is the difference between a regular sewing machine and a serger?

Key Differences The primary difference is the form of binding. A serger uses an overlock stitch, whereas most sewing machines use a lockstitch, and some use a chain stitch. Other differences include: Sergers use three or more thread sources.

How many thread spools do you use on a serger?

New serger owners often get scared when they realize they need FOUR spools of thread to sew the most common 4-thread overlock construction seam.

Does an overlocker replace a sewing machine?

An overlocker does not replace a sewing machine. Its primary function is to clean finish a raw edge, giving the project a professional appearance. Many overlocking stitches have built-in stretch, making them the perfect tool for seaming knit fabrics.

Which is the easiest overlocker to use?

Best Overlockers for Beginners Brother M343D Overlocker. Singer 14HD854 Pro Speed Overlock Machine. Janome 9300DX Overlocker. Singer Overlock 14SH754 Sewing Machine. Jaguar 489 Overlocker. Bernina Bernette B44 Overlocker Machine. Brother M1034D Overlocker. Janome 6234XL Overlocker.